Top

High Pressure Pumps

Hanna’s Hi-Pressure Pump Station is a reliable way to pump fresh water or filtered reclaim water at high pressures. Much more dependable than piston and plunger pumps, Hanna’s pump station utilizes the Wanner H-25 pump and comes complete with all the necessary fittings to lower the cost of installation and provide the longest service life.

Hanna’s Hi-Pressure Pump Station has a rugged stainless steel frame and comes equipped with a 115-gallon (435.32 L) storage tank with lid. The tank is supplied with a low level switch for safety and float valve to ensure a constant water level. The tank also includes Hanna’s exclusive perforated dividers and perforated cross channels, which increase the life of your pump by reducing vortices and other water turbulence that can allow air bubbles to get in the pump and produce cavitations. The pump is belt driven and protected with a belt guard. The pump station includes an adjustable belt take-up.

For operations that need larger flow rates or multiple components, there is Hanna’s Dual Hi-Pressure Pump Station. The dual pump station has the same features and similar rugged design as the single pump station, with two pumps. These two pumps are “stacked” on top of each other to save you valuable floor space. Each pump can be operated individually.

Pump Features

  • Attractive, light-weight polypropylene tank and lid
  • Heavy-duty stainless steel frame
  • Best high-pressure pump for reclaim application
  • Hydraulic-balanced diaphragms
  • Self priming
  • Plumbing comes fully assembled

Construction
Stainless Steel with Polypropylene Tank and Lid

Dual High Pressure Pump Options

18 GPM each, 36 GPM (136.28 LPM) combined

  • 850 PSI (58.61 bar), 10HP 60 Hz
  • 1000 PSI (68.95 bar), 15HP 60 Hz
  • 850 PSI (58.61 bar), 10HP 50 Hz
  • 1000 PSI (68.95 bar), 15HP 50 Hz
  • 850 (58.61 bar) & 1000 PSI (68.95 bar), 10HP & 15HP, 60 Hz

Dimensions

  • Length: 42.75″ (1.09 m) allow for 50″ (1.27 m)
  • Width: 27″ (.69 m)
  • Height: 78″ (1.98 m)

Single High Pressure Pump:

Pump Options — 18 GPM (68.14 LPM)

  • 850 PSI (58.61 bar), 10HP 60 Hz
  • 1000 PSI (68.95 bar), 15HP 60 Hz
  • 850 PSI (58.61 bar), 10HP 50 Hz

Dimensions

  • Length: 42.75″ (1.09 m) allow for 50″ (1.27 m)
  • Width: 27″ (.69 m)
  • Height: 78″ (1.98 m)
  • 1000 PSI (68.95 bar), 15HP 50 Hz
  • 850 (58.61 bar) & 1000 PSI (68.95 bar), 10HP & 15HP, 50 Hz
Print This Page Print This Page

Tagged:
Bottom